My Cart (0 )
universal scaler kit 3663 TV Controller Driver Board Digital Signal DVB-C DVB-T2 DVB-T Universal LCD UPGRADE 3463A with lvds
$25.04 $11.27
Description
Product Description:
This model is universal Controller 3663 gives the opportunity to build on the base of the laptop or monitor matrix full multimedia TV C T-2 tuner on board without depriving themselves of the opportunity of using it as a monitor.
Controller 3663 has on board analog-to-digital Touraine Rafael R842 with support for T-2, DVB-T, DVB-C, ATV, by just saying support for more digital signal cable, teletext and radio TV. As main chip has allowed not only to exploit the full potential of the TV chip, but not deprived of the possibility of reproducing a photo, video, audio files from a USB drive. All the innovations introduced in this model is made possible by the use of a more powerful master chip.
Suitable for :
Europe, Africa, The five Central Asian countries, the Middle East, Russia, Thailand, Myanmar, Kenya, Portugal, Malta, Uganda and other countries or regions.
Feature:
Support Digital Signal and Russian
Controller chip: LUA63A82
TV tuner chip: R842
OSD Language: Russian, English, Czech, France, Magyar, Polski, Dansk, Espanol, Hrvatski, Nederlands, Deutsch, Italliano, Norsk, Portugues, Suomi, Svenska, Arabic, etc. (more pls check the video)
Power Input: DC 12V 4A
Audio output power: 2x8W
Consumption: operating mode -> = 6W
simple – <0.3W
Video input: TV: DVB-T / T2, DVB-C, ANALOG TV (ATV)
HDMI
VGA
AV IN
YPbPr
TV tuner chip: R842
OSD Language: Russian, English, Czech, France, Magyar, Polski, Dansk, Espanol, Hrvatski, Nederlands, Deutsch, Italliano, Norsk, Portugues, Suomi, Svenska, Arabic, etc. (more pls check the video)
Power Input: DC 12V 4A
Audio output power: 2x8W
Consumption: operating mode -> = 6W
simple – <0.3W
Video input: TV: DVB-T / T2, DVB-C, ANALOG TV (ATV)
HDMI
VGA
AV IN
YPbPr
Additional inputs outputs: audio mini jack 3.5mm USB
USB slot can be used for updating software and playing multimedia, such as Movie, MP3 and JPEG.
How to know if your panel suitable for this board?
Step 1: Find your LCD model's resolution (you can check the resolution from this link: //www.panelook.com/index.php)
Supported resolutions:
1024 X 600 6 bit 1 channel
1024 X 768 6-bit 2 channel
1024 X 768 8-bit 2 channel
1024 X 768 6-bit 1 channel
1024 X 768 8-bit 1 channel
1280 X 768 8-bit 1 channel
1280 X 800 6-bit 1 channel
1280 X 1024 8-bit 2 channel
1366 X 768 8-bit 2 channel
1366 X 768 8-bit 1 channel
1400 X 1050 6 bit 2 channel
1440 X 900 8 bit 2 channel
1600 X 900 8-bit 2 channel
1600 X 1200 6-bit 2 channel
1680 X 1050 8-bit 2 channel
1920 X 1080 8-bit 2 channel
1920 X 1080 6-bit 2 channel
1024 X 768 6-bit 2 channel
1024 X 768 8-bit 2 channel
1024 X 768 6-bit 1 channel
1024 X 768 8-bit 1 channel
1280 X 768 8-bit 1 channel
1280 X 800 6-bit 1 channel
1280 X 1024 8-bit 2 channel
1366 X 768 8-bit 2 channel
1366 X 768 8-bit 1 channel
1400 X 1050 6 bit 2 channel
1440 X 900 8 bit 2 channel
1600 X 900 8-bit 2 channel
1600 X 1200 6-bit 2 channel
1680 X 1050 8-bit 2 channel
1920 X 1080 8-bit 2 channel
1920 X 1080 6-bit 2 channel
Step 2: Download the firmware from the link as below
firmware download link:
//drive.google.com/drive/folders/0BwGogd8IcNibZ1lhdnE3Ti1CNjQ
Install program:
1.Put the firmware “LUA63A82.bin” in USB disk——-then insert the USB disk———— plug 7KEY-Button to the board————-After turn on the power ,the light of the 7key button will be Red then flash red and blue————-after the light stop flashing ,it means upgrade has finished.
install program don't connect LVDS cable
(Note:!!! write programs do not power outages, crashing won't be able to use)
then power off——-connected all the cables indeed and correctly———-and power on again—-choose the country
How to into Factory setting?
Press”Input” button then press”2 5 8 0″
You can set a boot logo and mirror display.
Package included:
1 x 3663 Controller Board
1 x Remote
1 x IR
1 x IR Cable
1 x 25cm Data Cable
Buyer Show
Size
Languages
Searching
Play Movie From USB
How to into Factory setting?
Press”Input” button then press”2 5 8 0″
You can set a boot logo and mirror display.
Press INPUT 2580 into factory setting
if your display is bad,Press “input 2580” on the remote intofactory setting-“Special SET”-LVDS MAP
Then press“left/right” and change the LVDS Map number to the proper number, the LCD panel will go to the normal picture.
Connection just for reference (For Panel needs inverter)
Additional information
| Brand Name | AOKIN |
|---|---|
| Compatible Brand/Model | None |
| Model Number | AOKIN |
| Support Languages | Russian, English, Spanish, French, etc |
| DTV | DVB-C/T/T2 |
| High Definition | Yes |
| usb play | USB2.0 |
| how to into factory setting | press "input 2580" |
Reviews
There are no reviews yet.