NGPC high brightness LCD screen, NGPC backlight screen NGPC LCD for NEOGEO pocket color

This GB GBP GBC ngpc general LCD screen is our own research and development. At present, there are pirated products on the market！

We will make better products and fight against piracy!
Pirated products currently do not support the four models.
Next year, we will all use brand-new LCD screen for GB GBP GBC NGPC。
We are also in the process of making GBA LCD. Our plan will change the status quo and become more perfect.

Pirated vs. genuine

1) piracy uses low-cost chips, which are large in size and installed in the machine. The main board cannot be perfectly closed. The genuine uses the chip with smaller size and stronger performance, which can be perfectly installed in the machine, without the mainboard warping.
2) the pirated chip has a large volume and increased power consumption, which can not make the machine reach the expected endurance level. The genuine chip has strong performance and low power consumption, so the ordinary AA battery can be used for a long time.
3) piracy can’t update new functions in the first time. The genuine chip will update the new function in the first time.
At present, a store specializing in piracy for 13 years is selling pirated GBC LCD screen kits. Friends should not be cheated.

Our products are completely self-developed. We started this project as early as January 2019, and it can be run on GBC in March. At the beginning of development, compatibility with four models of GB GBP NGPC GBC was considered. It took half a year from the development and design to the market, and PCB samples were proofed several times.

This LCD screen can be used by GB NGPC GBC GBP. It only costs $3 to buy a single wiring.

Delivery list

1*2.2 “LCD
1*PCB
1*Wiring
1*Touch dimming cable
1*2.2 “LCD special glass mirror
1*Insulating tape
1*Sponge tape.

Our products are genuine!I hope you can support us!

The new version adds touch dimming

cable, which is more convenient.
The original touch dimming solder

joint is reserved for standby, and

one wire is welded to the touch.
The other end exposes the inner

metal core of the flying wire and

pastes it on the shell, so that

the light can be adjusted by

touch.
Change the combination key dimming

method: hold and press the key, +

– and then press the dimming

key.
Move R13 to R14.
Press and hold hold + – press

dark one.

Product characteristics:

Product characteristics:
1. Do not need to cut the shell, the motherboard does not need any welding, do not let your love machine injured.
2. Plug and play, ordinary players can also change themselves.
3. Backlight can be switched on and off, touch control, and brightness can be adjusted in 5 segments. Closing the backlight display effect is as clear as the original screen in the daylight.
4. Special chips are used to reduce power consumption. Batteries are charged with 1800 mA. The brightness of the screen is the highest. The normal game time is about 10-12 hours with a burning card.
5. The screen display scale is correct, 4 points to 1 point.
6. Thin machine and thick machine can be used in general.

Sponge tape is used to fix the LCD screen, as shown in the following figure.

Installation position of touch dimming cable

Paste the touch dimmer cable on the back of the mirror, so that the transparent machine will not expose the cable, which is more beautiful.

Precautions for installation!

1. Do not fold the LCD cable where there are electronic components!
2. Do not pull the LCD cable!
3. Do not tear off the polarizing film on the LCD screen!
4. The LCD screen should avoid water!
5. Do not paste double-sided tape on the black components and cables at the bottom of LCD screen!