Neoteck HDMI Extender With 2 Ports HDMI Splitter 1080p Extend 60m RJ45 Transmitter TX/RX with IR Remote Cable Support CAT6/CAT7
Long distance transmission of high definition signals is very difficult because HDMI cable is very expensive and infrequent. This HDMI extender breaks the problem of the expensive HDMI cable transmission distance, simply use one network cat6/cat6a/cat7 cable in stead of HDMI cable to extend HDMI signal to 60m , saving your money and space.
1）HDMI Extender with 2 ports HDMI Splitter.
2) Supports HDMI 1.3.
3) Follow standard IEEE-568B.
4）Can extend HDMI 1080p signal to 60m.
5）Support up to 20m cable length between the extender and the source device when use HDMI/AWG26 cable.
6）Indicator LED can indicate the working status.
7）Allows you control a DVD player or other HDMI video source from a remote location with the included IR cables.
8）Automatic adjustment to match cable length.
9）Installs in minutes. No need driver. Plug and play.
1) HDMI to RJ45 sender TX
2) RJ45 to HDMI receiver RX
3）DC5V/1A Power Adapter
4）IR blaster extension cable
5）IR receiver extension cable
1. This extender only support 2.0CH, can not support 5.1CH like DTS or dolby dts. Please set the PCM/LPCM first.
2.This extender can not support connect to the switch or the router, it can only support device to device directly.
HDMI Extender With 2 Ports HDMI Splitter
|Support HDCP Version||
|Support HDMI Resolution||
More than 60m by CAT6 Cable or higher level cable
|Support Network Cable||
CAT6, CAT6A, CAT7
DC5V 1A 2pcs
|Support IR remote control||
TX: 2W; RX< 2W