Mayflash Magic-NS Wireless for PS4/PS3/Xbox One S/360 Controller Fighting Stick Adapter to for Nintend Switch NS PC/NEOGEO MINI

Magic ns News

Mayflash Magic-NS Wireless for PS4/PS3/Xbox One S/360 Controller Fighting Stick Adapter to for Nintend Switch NS PC/NEOGEO MINI

Description:
New version 1.1 – comes with a USB-C to Female USB cable.

​Please visit the official web site : //www.mayflash.com/Support/Download/

and check about the new update firmware occasionally because the support team will release firmware to enhance the product.

– Wirelessly connect your for PS4, for PS3,for Nintendo Switch Pro, for Nintendo Switch for Joy-Con, for Wii U Pro, and for Xbox One S Bluetooth controllers to your for Nintendo Switch, for PS3 or PC system. Compatible with the Xbox 360 wireless controller by a Xbox 360 dongle.

– The wired for PS4, for PS3, for Nintendo Switch Pro, for Xbox One, for Xbox One S, for Xbox 360 controllers and fight sticks, and standard wired USB controllers can be connected to your for Nintendo Switch, for PS3 and PC system.

– Small size with perfect compatibility.

– Plug and Play!

Please know that it is compatible with NeoGeo Mini now, please visit the Mayflash official site and download the specific firmware： //www.mayflash.com/Support/Download/

Quick Start Guide

Buttons and LED Indicators

1.USB A-Male: Connect the adapter to the for Nintendo Switch, for PS3 or PC system.

2.USB A-Female: Connect the wired for PS4, for PS3, for Nintendo Switch Pro, for Xbox One, for Xbox One S, for Xbox 360 controllers and fight sticks, and standard wired USB controllers to the adapter.

3.LED Indicators

LED Indicator in Blue: for PS3 or PC Dinput System mode

LED Indicator blinks slowly: The Bluetooth is not connected yet

LED Indicator blinks quickly: The Bluetooth is syncing

LED Indicator lights up: The Bluetooth has been paired

LED Indicator in Red: for Nintendo Switch System mode

LED Indicator blinks slowly: The Bluetooth is not connected yet

LED Indicator blinks quickly: The Bluetooth is syncing

LED Indicator lights up: The Bluetooth has been paired

LED Indicator in Green: PC Xinput System mode

LED Indicator blinks slowly: The Bluetooth is not connected yet

LED Indicator blinks quickly: The Bluetooth is syncing

LED Indicator lights up: The Bluetooth has been paired

Note: The Bluetooth is not connected yet if LED Indicators blink slowly (around 2 times/second).

4.Button on the side of the adapter: Used for the modes switch and Bluetooth pairing.

– Press the button shortly to SYNC the controllers and the adapter. The indicator blinks quickly.

– To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in blue for the for PS3 or PC Dinput system mode, the for Nintendo Switch mode is red and the PC Xinput mode is green.

Bluetooth Controllers Set Up

1.Firstly connect the for Nintendo Switch system to a TV. Just turn on your PC if you use the adapter on your PC system.

2.Connect the adapter into any spare USB port on your for Nintendo Switch or PC system.

3.To switch the modes, press and hold the button on the side of the adapter for 3-5 seconds. The LED indicator blinks slowly in blue for the for PS3 or PC Dinput system mode, the Nintendo Switch mode is red and the PC Xinput mode is green.

4.Turn on the Bluetooth controllers

5.To sync the Bluetooth controller and the adapter, press the Button on the side of the adapter, and then press the SYNC button on your Bluetooth controller. The LED indicator blinks quickly.

Note: If the Bluetooth syncing failed, please connect the Bluetooth controller to the adapter using a USB cable (not included in the packaging, you can purchase it separately). As soon as the controller is identified by the system, you can disconnect the USB cable and start to SYNC it again.

6.The Bluetooth has been paired if the LED indicator lights up

7.Your controller is now ready to use.

Wired Controllers Set UP

1.Firstly connect the for Nintendo Switch system to a TV. Just turn on your PC if you use the adapter on your PC system.

2.Connect the adapter into any spare USB port on your for Nintendo Switch or PC system.

3.Connect the wired controllers to the adapter.

Note: Connect the wireless for PS4, for PS3, for Nintendo Switch Pro, for Xbox One S Controller to the adapter using a USB cable (coming with your game console system or you can purchase it separately) for Xbox 360 controller must be a wired one, not a wireless controller plus a USB cable.

4.Your controller is now ready to use.

Update the Software

If you are having problems with the adapter, you can follow the below instructions to update the software.

1. Download the software from Mayflash official site and install it on your Windows system.

2. Double click on the updater and leave the updater window open on your screen.

3. Connect the USB from your adapter into any spare USB port on your PC.

4. Please make sure your adapter is in the Nintendo Switch or for PS3/Dinput mode (The LED indicator is in Red or Blue). If not, please switch the adapter to the for Nintendo Switch or for PS3/Dinput mode by pressing and holding the button located at the side of the adapter for 3-5 mintues.

5. As soon as the adapter has been recognized (LED indicator turns off), select “Update”.

6. Do not disconnect the device until you are informed that the updated was completed successfully.

Note:

1.Only one Bluetooth controller is supported for one adapter.

2.A wired USB controller and a wireless Bluetooth controller can be connected at the same time, but both of them have the same functions and can only play one game character.

3.To switch A-B, B-A, X-Y, Y-X, press and hold the button Start and A for 3 seconds. To switch A-A, B-B, X-X, Y-Y, press and hold the button Start and B for 3 seconds. This works only when you connect your for Switch Pro, Switch for Joy-Con and for Wii U Pro controllers to a PC Xinput system.

4.If you connect up to 4 Bluetooth controllers to the adapter, you can disconnect the first controller by pressing the button located on the side of the adapter, and disconnect the second one by pressing the button, and then the third and fourth controller using the same way.

5.To use the for Nintendo for Joy-Con controllers, please connect the for Nintendo for Joy-Con (R) firstly, then connect the for Joy-Con (L).

6.for Logitech wireless gamepad F710 is supported. Please make sure you connect the emitter to the adapter before using.

Package Included:

1 x MayFlash MAGIC-NS Wireless Controller Adapter

MayFlash MAGIC-S PRO Wireless Controller Adapter for Nintend Switch/for PS4/for PS3/for NEOGEO mini/for PS Classic for Logitech F710

Descriptions:
Advanced version of Mayflash Magic Series adapter. With LED indicator to show six different working modes. More console and functions are supported!

System Compatibility:
– for Nintendo Switch, for PlayStation 4, for PlayStation 3, Windows, for NEOGEO mini, for PS Classic

Controller Compatibility:
– for Bluetooth Controllers: for Xbox for Bluetooth controller, for DualShock 3, for DualShock 4, for DualShock 4 Pro, for Wiimote, for Wii U Pro, for Switch for Joy-Cons, for Switch Pro
– Wired USB Controllers: The wireless controller that comes from your console will become a wired controller by simply connecting a standard USB cable (with exception of for Xbox 360 which requires an official for Microsoft wired for Xbox 360 controller). For best results, it is recommended that you use original for Nintendo Switch Controllers, or genuine for Xbox or for PlayStation controllers and quality certified USB cables.

Features:
– for DualShock 4 support vibration / 6-axis motion on for Switch
– X-input mode support vibration
– Vibration intensity can be adjusted. 7 levels of the vibration intensity
– The buttons A, B, X, Y can be exchanged.
– Lag-free

NOTE:
– Only one for Bluetooth controller is supported for one adapter. You can connect two or more controllers with two or more adapters by a HUB (NOT incl.).
– A wired USB controller and a wireless for Bluetooth controller can be connected at the same time, but both of them have the same functions and can only play one game character.
– Please turn on the “Pro Controller Wired Communication” of the for Nintendo Switch system once you for switch the adapter to the for Switch Pro mode
– for Logitech wireless gamepad F710 is supported. Please make sure you connect the emitter to the adapter before using.

Package Includes:
1 x Magic-S Pro Adapter
1 x USB Type C Cable
1 x Buttons Sticker
1 x Manual

8Bitdo Wireless Bluetooth Usb Controllers for PS4/PS3 for Xbox One S/X USB Adapter on for Nintendo Switch for Windows Mac

Manual Download: //support.8bitdo.com/

Description:
8Bitdo USB Wireless Adapter connect your wireless controllers conveniently.

Features:
1.For use with for PS4, for PS3, for Wii Mote, for Wii U Pro for Xbox One S for Xbox One X wirelessly on Nintendo Switch. Support DS4 Motion and Rumble features.

2.For use with 8Bitdo Controllers, for Nintendo Switch Pro, for Nintendo Switch Joy-cons, forPS4, for PS3, for Wii Mote, for Wii U Pro for Xbox One S for Xbox One X and more, wirelessly, on for Windows PCs, for Macs, forRaspberry Pi, for laptops, tablets.

3.Simply connect the Adapter to your Wireless Controller to enable the same wireless experience you are used to on all the best platforms.

4.Wireless bluetooth, no lag.

5.UPDATE TO THE LATEST FIRMWARE AT SUPPORT.8BITDO.COM

NOTE:

1.Power on 8Bitdo controller to enter pairing mode

2.Press pairing button on Retro Receiver to pair new controller

3.Wait until both LEDs are solid blue

4.Your controller is now paired

Package Includes:
USB wireless adapter x1