High brightness LCD retrofit kit for Gameboy DMG GB，DMG GB backlit LCD

It is difficult to install the GB highlighted LCD cable. If it cannot be installed, please find a professional to install it.

You can send us the GB game console, we can install it for you and send it back.
There will be no extra manual fee. We will be happy to serve you.
This is the easiest way, and you don’t have to worry about damage during the installation of LCD kit.

Please read the following installation instructions and pictures carefully before installation.

If you buy the highlighted GB LCD panel kit, you will get the GBC cable for free. If you fail to install it on GB, you can use it on GBC to reduce the loss.

The aged and rusty main board will cause black spots on the left side of the LCD screen, so the main board can only be replaced. There is no need to replace the main board of the LCD cable.

If you can’t install the GB LCD screen, you can also buy our modified highlight GB game console.

//www.aliexpress.com/item/4000457132596.html

This GB GBP GBC ngpc general LCD screen is our own research and development. At present, there are pirated products on the market！

We will make better products and fight against piracy!
Pirated products currently do not support the four models.
Next year, we will all use brand-new LCD screen for GB GBP GBC NGPC。
We are also in the process of making GBA LCD. Our plan will change the status quo and become more perfect.

Pirated vs. genuine

1) piracy uses low-cost chips, which are large in size and installed in the machine. The main board cannot be perfectly closed. The genuine uses the chip with smaller size and stronger performance, which can be perfectly installed in the machine, without the mainboard warping.
2) the pirated chip has a large volume and increased power consumption, which can not make the machine reach the expected endurance level. The genuine chip has strong performance and low power consumption, so the ordinary AA battery can be used for a long time.
3) piracy can’t update new functions in the first time. The genuine chip will update the new function in the first time.
At present, a store specializing in piracy for 13 years is selling pirated GBC LCD screen kits. Friends should not be cheated.

Our products are completely self-developed. We started this project as early as January 2019, and it can be run on GBC in March.
At the beginning of development, compatibility with four models of GB GBP NGPC GBC was considered. It took half a year from the development and design to the market, and PCB samples were proofed several times.

Delivery list

1*2.2 “LCD
1*PCB
1*Wiring
1*Touch dimming cable
1*2.2 “LCD special glass mirror
1*Insulating tape
1*Sponge tape.

Do not fold the place with electronic components on the cable, it is easy to cause open circuit!

Do not fold the chip on the cable. Once folded,
the cable will be damaged,
and the LCD screen will not display normally!

Installation method

GB LCD cable is welded to PCB board, so it must be skilled in welding technology.
If your welding technology is poor, please find a professional mobile phone repair shop or electrical repair shop for installation.
Just remove the original LCD screen and weld the new LCD cable. The following installation process is very simple. Pay attention that the LCD dimmer cable cannot touch the metal,

Fixed position of LCD: move down as far as possible. The border is on the line at the edge of the shell.

//m.youtube.com/watch?v=gT1XbwIfRYk&list=PLQtzBkZ-AJHY9NAktXkdxjr3gy7x_rJ1y&index=12&t=0s gbp

//youtu.be/9eQfRJmWQK8?list=PLQtzBkZ-AJHY9NAktXkdxjr3gy7x_rJ1y gbc

How to align LCD

After the machine is installed, the LCD screen is slightly skewed. You can remove the mirror surface with the suction cup, and then adjust the position of the LCD screen.

Due to the removal of the original LCD screen fixed frame, the gap between the motherboard and the shell is reduced. It should be noted that the motherboard screws should not be screwed too tight, they will penetrate the shell!